Sound-devices 702T Manual de usuario descargar pdf (Pagina 15)

702T User Guide and Technical Information

Left Panel Connectors and Controls

702T

1 7 6

1) XLR Input 1/AES3 Input 1&2

Dual function input connection. Input

type set with switch above. Active-bal-

anced analog microphone- or line-level

input for input 1. Transformer-balanced

two-channel AES3 input (1 and 2).

2) XLR Input 2

Active-balanced analog microphone- or

line-level input for input 2.

3) Mic-Line Input Switch

Selects the input level and mode of the

associated XLR input connector. Input 1

also can be selected for AES3 input.

4) TA3 Master (L/R) Analog Outputs

Active-balanced, line-level analog L/R

outputs for the Master Output Bus. Pro-

gram source and attenuation level are

user selectable. Pin-1 ground, pin-2 (+),

pin-3 (–).

5) Headphone Output

3.5 mm TRS stereo headphone connec-

tor. Can drive headphones from 8 to

1000 ohm impedances to very high lev-

els. Tip-left, ring-right, sleeve-ground.

6) Headphone Level

Adjusts the headphone output level.

NOTE: the 702T is capable of producing

ear-damaging levels in headphones.

7) Tape Output

Unbalanced tape (–10 dBv nominal)

output on 3.5 mm TRS stereo connector.

Signal source is identical to the Master

Output Bus. Tip-left, ring-right, sleeve-

ground.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 83 84

Sin comentarios

Sound-devices 702T Manual de usuario Pagina 15